SPRAYON PRODUCTS DIV OF THE SHERWIN WILLIAMS CO -- DUNCAN CERAMIC SEALER: SS 330 SUPER GLOSS -- 8010-00F002994 
=====================  Product Identification  =====================

Product ID:DUNCAN CERAMIC SEALER: SS 330 SUPER GLOSS
MSDS Date:05/01/1995
FSC:8010
NIIN:00F002994
=== Responsible Party ===
Company Name:SPRAYON PRODUCTS DIV OF THE SHERWIN WILLIAMS CO
Address:3818 CORONADO ST
City:ANAHEIM
State:CA
ZIP:92806-5000
Country:US
Info Phone Num:714-630-1400
Emergency Phone Num:216-566-2917
Preparer's Name:SCOTT MATTISON
CAGE:5N004
=== Contractor Identification ===
Company Name:DUNCAN ENTERPRISES
Address:5673 E SHIELDS AVE
Box:City:FRESNO
State:CA
ZIP:93727
Country:US
Phone:209-291-4444
CAGE:21546
Company Name:SPRAYON PRODUCTS DIV OF THE SHERWIN-WILLIAMS CO
Address:3818 CORONADO ST
Box:City:ANAHEIM
State:CA
ZIP:92806
Country:US
Phone:714-632-1242
CAGE:5N004

=============  Composition/Information on Ingredients  =============

Ingred Name:TOLUENE (IARC CARC- GROUP 3)     *96-2*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 6%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:METHYL ETHYL KETONE, 2-BUTANONE   *96-2*
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 9%
Other REC Limits:590 MG/CUM
OSHA PEL:200 PPM
ACGIH TLV:590 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:BUTYL ACETATE (N-BUTYL ACETATE)   *96-2*
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 5%
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL     (IARC - GROUP 3)  *96-2*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 18%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL
    CELLOSOLVE, BUTYL GLYCOL, GLYCOL ETHER EB  * 96-2 *
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 4%
Other REC Limits:25 PPM (SKIN)
OSHA PEL:50 PPM (SKIN)
ACGIH TLV:25 PPM (SKIN)

Ingred Name:DICHLOROMETHANE (METHYLENE CHLORIDE) (SUSP HUMAN CARC BY
    ACGIH, SUSP ANIM CARC BY IARC; NTP - IARC GROUP 2B) *96-2*
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 15%
ACGIH TLV:174 MG/CUM (A2)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PROPANE (DIMETHYLMETHANE)	*96-2*
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 13%
Other REC Limits:1800 MG/CUM
OSHA PEL:1000 PPM
ACGIH TLV:SIMPLE ASPHYXIANT

Ingred Name:BUTANE, N-BUTANE
CAS:106-97-8
RTECS #:EJ4200000
Fraction by Wt: 12%
Other REC Limits:800 PPM
OSHA PEL:800 PPM
ACGIH TLV:1900 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:YES
Health Hazards Acute and Chronic:VAPORS IN HIGH CONCENTRATIONS ARE
    ANESTHETIC. IRRITATION TO SKIN & UPPER RESPIRATORY SYSTEM. CONTAINS
    PETROLEUM DISTILLATES, HARMFUL/FATAL IF SWALLOWED.
    REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY  CAUSE PERMANENT
    BRAIN & NERVOUS SYSTEMDAMAGE, ALSO KIDNEY & LIVER DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, LIGHT-HEADEDNESS, STAGGERING GAIT,
    GIDDINESS, NAUSEA.
Medical Cond Aggravated by Exposure:METHYLENE CHLORIDE: CARDIOVASCULAR
    PROBLEMS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
    INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEEDED.
    INGESTION: DON'T INDUCE VOMITING. ASPIRATION OF MATERIAL INTO LUNGS
    CAN CAUSE CH EMICAL PNEUMONITIS, WHICH CAN BE FATAL.OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:<0F PROPELLANT
Lower Limits:1
Upper Limits:10.6
Extinguishing Media:CO2, DRY CHEMICAL/FOAM.
Fire Fighting Procedures:WATERSPRAY MAY BE INEFFECTIVE. WATER MAY BE
    USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
    PREFERABLE. USE SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE &
    AUTOIGNITE WHEN EXPOSED TO EXTREME HEAT. VAPORS ARE >AIR & TRAVEL
    ALONG GROUND/BE MOVED BY VENTILATION. REMOVE IGNITION SOURCES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE IGNITION SOURCES. VENTILATE AREA,
    ABSORB ON ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F/IN DIRECT
    SUNLIGHT/NEAR HEAT/OPEN FLAMES. DON'T PUNCTURE/INCINERATE.
Other Precautions:KEEP AWAY FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF SPRAYING, DON'T INHALE MIST. USE RESPIRATOR
    THAT IS NIOSH/MSHA/EQUIVALENT, FOR ORGANIC VAPORS IF TLV'S ARE
    EXCEEDED.
Ventilation:LOCAL/MECHANICAL (GENERAL): RECOMMENDED
Protective Gloves:CHEMICAL RESISTANT, NEOPRENE
Eye Protection:REQUIRED
Other Protective Equipment:SOLVENT-RESISTANT BOOTS, APRON,
    HEADGEAR/FACESHIELD.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH THOROUGHLY BEFORE EATING, DRINKING, SMOKING/LEAVING
    WORK.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:<0-340F
Vapor Density:>1
Spec Gravity:0.81
Evaporation Rate & Reference:FASTER THAN ETHER
Appearance and Odor:TYPICAL SOLVENT PAINT
Percent Volatiles by Volume:89

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, HEAT, ALKALIES, REACTIVE METALS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, TEMP >120F, HOT
    SURFACES.
Hazardous Decomposition Products:BURNED: CO, CO2, VARIOUS HYDROCARBONS,
    NITROGEN COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.